K 1500 Truck 4WD V8-5.3L VIN T (2000)
Transmission Cooler: Service and Repair
4L80-E Automatic Transmission
Removal Procedure
1. Remove the two bolts securing the auxiliary oil cooler bracket to the radiator support.
2. Remove the auxiliary oil cooler from the radiator support.
Installation Procedure
Notice: Refer to Fastener Notice in Cations and Notices
1. Install the two bolts securing the oil cooler to the radiator support.
Tighten the bolts to 12 Nm (9 ft. lbs.).
2. Ensure the guide pin bolt is positioned into the support hole.
