K 1500 Truck 4WD V8-5.3L VIN T (2000)
1. Lubricate the cavity between the seal lips and the bearing with wheel bearing lubricant. Refer to Fluid and Lubricant Recommendations.
2. Install the bearing using the J 23690 or the J 29709 and the J 8092.
3. Drive the bearing into the axle housing until the tool bottoms against the tube.
4. Install the seal using the J 21128 or the J 29713.
5. Drive the tool into the bore until the seal bottoms flush with the tube.
6. Install the axle shaft (1).
Refer to Axle Shaft Replacement (8.6 or 9.5 inch Ring Gear).
See: Differential Assembly/Service and Repair/Rear Drive Axle/Axle Shaft Replacement/8.6, 9.5 Inch Axle
7. Remove the supports and lower the vehicle.
