K 1500 Truck 4WD V8-5.3L VIN T (2000)
1. Remove the shift lever. Refer to Shift Lever.
2. Remove the four bolts securing the shift housing to the transmission.
3. Remove the insulator from the transmission case.
Installation Procedure
1. Install the insulator to the transmission case.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the four bolts securing the shift housing to the transmission.
Tighten the shift housing bolts to 20 Nm (15 ft. lbs.).
3. Install the shift lever. Refer to Shift Lever.
