K 1500 Truck 4WD V8-5.7L VIN R (1997)
10. Install the valve rocker arm cover.
11. Install the fuel supply and return lines at the rear of the lower intake manifold.
12. Install the wiring harness and brackets.
13. Install the cruise control cable (if equipped).
14. Install the throttle cable and bracket. Refer to Powertrain Management.
15. Install the transmission oil level indicator tube. Refer to Transmission and Drivetrain.
16. Install the EGR inlet tube, clamp, and bolt.
17. Install the PCV valve and vacuum hoses.
18. Install the power brake vacuum tube.
19. Install the generator and the bracket bolt, (if needed).
20. Install the air conditioning compressor and bracket. Refer to Heating and Air Conditioning.
21. Install the distributor. Note the relationship of the distributor housing and rotor made at disassembly.
