K 1500 Truck 4WD V8-6.0L VIN U (2001)
2. Remove the inside door handle mounting bolts.
3. Slide the inside door handle forward to release the unit from the door.
4. Disconnect the control rod from the inside door handle.
5. Remove the door handle assembly from the door.
Installation Procedure
1. Connect the control rod to the inside door handle.
2. Slide the handle into place.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the inside door handle retaining bolts.
Tighten the door handle retaining bolts to 9 N.m (80 lb in).
4. Install the trim panel.
