K 1500 Truck 4WD V8-6.0L VIN U (2001)
1. Remove the nuts retaining the jack and the bracket.
2. Remove the jack and the bracket from the vehicle.
3. Remove the nut retaining the tool kit.
4. Remove the tool kit from the vehicle.
Installation Procedure
1. Install the tool kit and the retaining nut.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the jack and the bracket with the retaining nut.
Tighten the nuts to 9 N.m (80 lb in).
Jack and Tool Stowage Replacement (Regular Cab)
Jack and Tool Stowage Replacement (Regular Cab)
Removal Procedure
1. Remove the nut retaining the tool stowage cover and remove the cover, if equipped.
2. Remove the nuts retaining the jack and the bracket.
3. Remove the jack and the bracket from the vehicle.
4. Remove the nut retaining the tool kit