K 1500 Truck 4WD V8-6.0L VIN U (2001)
Tailgate Release Handle: Service and Repair
Endgate Handle Replacement (Utilities)
Endgate Handle Replacement (Utilities)
Removal Procedure
1. Open the liftgate.
2. Remove the trim panel.
3. Remove actuator cable assembly from handle.
4. Remove the nuts from the back of the endgate behind the handle assembly.
5. Remove the handle assembly.
Installation Procedure
1. Install the handle assembly into the endgate.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the nuts onto the handle assembly from the back of the endgate.
Tighten the bolts to 9 N.m (80 lb in).
3. Install the actuator cable assembly to the handle.
4. Install the liftgate trim panel.
