K 1500 Truck 4WD V8-6.0L VIN U (2001)
Oil Pressure Sensor: Service and Repair
TOOLS REQUIRED
J 41712 Oil Pressure Sensor Socket
REMOVAL PROCEDURE
1. Remove the engine sight shield.
IMPORTANT: Clean the area around the sensor before removal. Do not allow debris to enter the engine.
2. Disconnect the oil pressure sensor electrical connector.
3. Remove the oil pressure sensor using the J 41712 or equivalent.
INSTALLATION PROCEDURE
1. Apply sealant GM P/N 12346004 or equivalent to the threads of the oil pressure sensor.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Use the J 41712 or equivalent in order to install the oil pressure sensor.
Tighten
Tighten the oil pressure sensor to 20 N.m (15 lb ft).
3. Connect the oil pressure sensor electrical connector.
