gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

EGR Valve|Purpose|Page 7108 > < EGR Valve|Purpose|Page 7106
Page 1
background image

EGR Valve: Description and Operation
Diagnosis

Diagnosis

Too much EGR how causes any of the following conditions to occur:

^

The engine stalls after a cold start.

^

The engine stalls during closed throttle conditions.

^

The vehicle surges during a cruise condition.

^

A rough idle.

^

A DTC P0300, misfire detected.

Too little or no EGR flow allows the combustion temperatures to increase. This causes the following symptoms:

^

Spark knock, detonation

^

Engine overheating

^

Emission test failure

^

DTC P0401

^

Poor fuel economy

The EGR flow diagnosis is included in the DTC P0401 diagnostic table. The EGR pintle position and the EGR valve control circuit diagnosis are
covered in DTCs P0404, P0405, and P1404. Go to the appropriate DTC table for diagnosis if an EGR DTC is stored.

EGR Valve|Purpose|Page 7108 > < EGR Valve|Purpose|Page 7106