K 1500 Truck 4WD V8-6.0L VIN U (2001)
1. Install the vehicle speed sensors (1) and the bracket assemblies on the case.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts.
^
Tighten the bolts to 11 Nm (96 inch lbs.).
3. Connect the speed sensor connectors (2).
Allison - Automatic Transmission
Speed Sensor Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Be sure the vehicle ignition is turned off.
2. Disconnect the external wiring harness from the speed sensor.
3. Remove the bolt (1) from the speed sensor and carefully remove the speed sensor (2).
Installation Procedure
Important: Do not rotate the sensor in its retaining bracket. Changing the sensor/bracket orientation may cause improper operation.
