K 1500 Truck 4WD V8-6.0L VIN U (2001)
11. Install the nut (5).
12. Refer to Pitman Shaft Over-Center Preload Adjustment - Off Vehicle to adjust the pitman shaft.
670 Gear
-
Tools Required
-
J 6278 Pitman Shaft Bearing Remover and Installer
-
J 6219 Pitman Shaft Oil Seal Installer
-
J 4245 Internal Snap Ring Pliers
Disassembly Procedure
1. Remove the steering gear pitman shaft and housing cover. Refer to Steering Gear Pitman Shaft and Housing Cover Replacement - Off Vehicle.
2. Remove the pitman arm (4) from the steering gear.
3. Remove the pitman shaft boot (3) from the steering gear housing (1).
Important: Do not score the housing bore when prying out seals and washers.
4. Remove the pitman shaft dust seal (2) from the steering gear housing (1).
5. Remove the pitman shaft retaining ring (2) from the steering gear housing (1) using J 4245.
