K 1500 Truck 4WD V8-6.0L VIN U (2001)
3. Connect the outer tie rod assembly (1) to the steering knuckle (2).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the torque prevailing nut (3) to the outer tie rod stud (1).
-
Tighten the torque prevailing nut (3) to 50 Nm (37 ft. lbs.).
Important: Be sure the rack and pinion boot is not twisted after the toe adjustment.
5. Check the wheel alignment. Refer to Measuring Wheel Alignment.
6. Tighten the jam nut.
-
Tighten the jam nut against the outer tie rod end to 68 Nm (50 ft. lbs.).
