K 1500 Truck 4WD V8-6.0L VIN U (2001)
Suspension Travel Bumper: Service and Repair
Rear Suspension
Spring Bumper Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the jounce bumper mounting bolt.
3. Remove the jounce bumper (15 series utilities are snap fit).
Installation Procedure
1. Install the jounce bumper (15 series utilities are snap fit).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the jounce bumper bolt.
^
Tighten the bolt to 32 Nm (24 ft. lbs.).
3. Remove the safety stands.
4. Lower the vehicle.
