K 1500 Truck 4WD V8-6.0L VIN U (2001)
Clutch Master Cylinder: Service and Repair
Master Cylinder Replacement
Master Cylinder Replacement
Removal Procedure
1. Locate the clutch master cylinder on the dash panel in the engine compartment.
2. Quick connect the hydraulic line to the master cylinder.
3. Push the clutch pedal down all the way and squeeze in the tabs to release the pushrod bushing from the clutch pedal pocket.
4. Turn the master cylinder 45 degrees counterclockwise to unlock the master cylinder.
5. Disconnect the wiring harness from the clutch master cylinder start switch.
6. Remove the clutch master cylinder from the dash panel.
7. Remove the clutch master cylinder from the vehicle.
Installation Procedure
1. Position the clutch master cylinder to the vehicle.
2. Install the master cylinder to dash panel.
