K 1500 Truck 4WD V8-6.0L VIN U (2001)
13. Remove the bolts and the yoke retainers from the transmission pinion yoke (w/ RPO MW3 or M74).
14. Remove the front propeller shaft by disconnecting the front propeller shaft from the transmission pinion yoke (w/ RPO MW3 or M74).
Installation Procedure
1. Install the front propeller shaft by sliding the front propeller shaft into the transmission or the transfer case (w/o RPO MW3 or M74).
2. Install the front propeller shaft to the transmission pinion yoke (w/ RPO MW3 or M74).
Important:
^
Align the reference marks made during removal.
^
Tighten the bolts until snug. Do not torque the bolts at this time.
3. Install the yoke retainers and the bolts (w/ RPO MW3 or M74).