K 1500 Truck 4WD V8-6.0L VIN U (2001)
9. Remove the wheel hub and bearing (4) mounting bolts (25 Series).
10. Remove the wheel hub and bearing and splash shield from the vehicle.
11. Remove the O-ring seal from the steering knuckle bore (25 Series).
12. Remove the wheel speed sensor mounting bolt (5).
13. Clean and inspect the O-ring seal (25 Series).
14. Replace the seal if the following conditions exist:
^
Nicks
^
Cuts
^
Dry or brittle
^
Compression set
Installation Procedure
