K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
3. Install the camshaft thrust plate on the engine block.
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Install the thrust plate retaining bolts
^
Tighten the bolts to 23 Nm (17 ft. lbs.)
5. Install the timing chain and sprockets on the camshaft. Refer to Timing Chain and Sprockets Replacement.
6. Install the valve lifters; in the engine block. Refer to Valve Lifter Replacement.
7. Install the cylinder head assembly on the engine block. Refer to Cylinder Head Replacement.
8. Install the pushrods in the valve lifters. Refer to Valve Rocker Arm, Shaft, and Push Rod Replacement.
9. Install the valve rocker arm and shaft to the cylinder head. Refer to Valve Rocker Arm, Shaft, and Push Rod Replacement
10. Install the valve rocker arm cover to the cylinder head. Valve Rocker Arm Cover Replacement.
11. Install the right exhaust manifold to the cylinder head. Refer to Exhaust Manifold Replacement (Right Side).
12. Install the left exhaust manifold to the cylinder head. Refer to Exhaust Manifold Replacement (Left Side).
13. Install the turbocharger to the right exhaust manifold. Refer to Turbocharger Replacement.
14. Install the oil pump drive in the engine block. Refer to Oil Pump Drive Replacement
15. Install the radiator in the vehicle. Refer to Radiator Hose Replacement in Cooling System.
16. Install the air conditioning condenser to the vehicle. Refer to Condenser Replacement in Heating and Air Conditioning.
17. Install the auxiliary engine oil cooler if equipped. Refer to Engine Oil Cooler Line Replacement in Cooling System.
18. Install the front grille and parking lamp assembly to the vehicle.
19. Refill the cooling system. Refer to Drain Cock Replacement in Cooling System.
20. Connect both the battery negative cables to the batteries. Refer to Battery Cable in Powertrain Management.
21. Charge the air conditioning system. Refer to Refrigerant Recovery and Recharging in Heating and Air Conditioning.
22. Perform TDC offset timing adjustment procedure. Refer to TDC Offset Adjustment in Powertrain Managements.
