K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
5. Clean the recess of the engine block. Refer to.
INSTALLATION PROCEDURE
IMPORTANT: This plug has an orifice hole that prevents an air lock from occurring and blocking the oil flow.
1. Install the oil cooler bypass valve by using a socket to drive the bypass valve into the bore until seated on the shoulder in the bore.
2. Install the cup plug for the oil cooler bypass valve.
3. Install the oil filter bypass valve into the engine block.
4. Use a socket to drive the valve into the bore until the valve seats against the shoulder inside the bore.
5. Install the oil filter fitting into the engine block (2 wheel drive only).
NOTICE: Refer to Fastener Notice in Service Precautions.
