K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
5. Install the flywheel inspection cover if needed.
6. Install the transfer case (4 wheel drive models only).
^
For the BW 4401, BW 4470, and NVG 241 -NP2 transfer cases, refer to Transfer Case Replacement in Transmission and Drivetrain.
^
For the NVG 243-NP1 transfer case, refer to Transfer Case Replacement in Transmission and Drivetrain.
^
For the NVG 246-NP8 transfer case, refer to Transfer Case Replacement in Transmission and Drivetrain.
7. Install the front propeller shaft (4 wheel drive models only). Refer to.
^
For vehicle equipped with the non active transfer case, refer to Propeller Shaft Replacement (Front Axle - All Except NP8) in Transmission
and Drivetrain.
^
For vehicle equipped with the active transfer case, refer to Propeller Shaft Replacement (Front Axle - NP8) in Transmission and Drivetrain.
8. Lower the vehicle.
9. Install the oil level indictor and tube to the engine block. Refer to Oil Level Indicator and Tube Replacement.
10. Connect both the battery negative cables to the batteries. Refer to Battery Cable in Powertrain Management.
