K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Oil Pressure Sender: Service and Repair
REMOVAL PROCEDURE
^
Tools Required
-
J 41712 Oil Pressure Sending Unit Socket
1. Remove the engine cover from the engine block.
2. Remove the fuel filter/water separator from the lower intake manifold and position to the side.
3. Remove the electrical connector from the oil pressure sending unit.
4. Use the J 41712 to remove the oil pressure sending unit from the engine block.
INSTALLATION PROCEDURE
^
Tools Required
-
J 41712 Oil Pressure Sending Unit Socket
NOTICE: Refer to Fastener Notice in Service Precautions.
