K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
REMOVAL PROCEDURE
1. Remove the left knee bolster.
2. Remove the retaining screws (6) from the outlet duct.
3. Disconnect the duct from the air distribution duct (2).
4. Remove the outlet duct (4) from the vehicle.
INSTALLATION PROCEDURE
1. Install the outlet duct (4) into the vehicle.
2. Connect the duct to the air distribution duct (2).
3. Install the retaining screws (6) into the outlet duct.
4. Install the left knee bolster.
Air Outlet Replacement - Floor
REMOVAL PROCEDURE
1. Remove the screw from the floor air outlet duct.
2. Remove the floor air outlet duct.
INSTALLATION PROCEDURE
1. Install the floor air outlet duct.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the screw to the floor air outlet duct.
Tighten
Tighten the screw to 1.9 N.m (17 lb in).
Air Outlet Replacement - Rear Floor
