K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Air Duct: Service and Repair
HVAC System - Manual
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the instrument cluster trim plate.
3. Remove the radio.
4. Tilt back the instrument panel. Refer to IP Carrier Replacement in Instrument Panel, Gauges and Console.
5. Remove the duct mounting screws.
6. Remove the duct.
INSTALLATION PROCEDURE
1. Install the duct to the instrument panel.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the duct mounting screws.
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
3. Roll the instrument panel forward. Refer to IP Carrier Replacement in Instrument Panel, Gauges and Console.
4. Install the radio.
5. Install the instrument panel bezel.
6. Connect the negative battery cable.
