K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Door Switch: Service and Repair
Door Jamb Switch Replacement (Door)
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Locate the door jamb switch. The switch is under the left side of the instrument panel.
3. Squeeze together the tangs of the switch.
4. Push the switch through the side of the instrument panel.
5. Disconnect the electrical connector of the door jamb switch.
6. Remove the door jamb switch.
INSTALLATION PROCEDURE
1. Connect the electrical connector of the door jamb switch.
2. Squeeze together the tangs of the switch.
3. Push the switch through the side of the instrument panel.
4. Connect the negative battery cable.
