K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
EGR Control Solenoid: Service and Repair
EGR Valve Vent Solenoid
EGR Solenoid
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Remove the negative battery cables.
2. Remove the electrical connector from the solenoid.
3. Remove the vacuum hoses.
4. Remove the EGR Vent solenoid mounting bolt (2).
5. Remove the EGR vent solenoid (1).
INSTALLATION PROCEDURE
1. Install the EGR vent solenoid (1).
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install EGR Vent Solenoid mounting bolt (2).
Tighten
Tighten mounting bolt to 6.0 N.m (53 lb in).
3. Install the vacuum hoses.
4. Install the electrical connector to the solenoid.
5. Install the negative battery cables.
