K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Interior lights will illuminate for 15 seconds under any of the conditions listed below:
^
Open and close the driver's side door
^
Open and close the passenger side door
^
Open and close a rear passenger door
Interior Illumination
Interior lights will illuminate continuously if the interior light defeat button is off and any door is opened or the liftgate is opened, or if the dimmer
switch is rotated to the on position for interior illumination.
Exit Lighting
Interior lights will illuminate for 40 seconds when the ignition key is removed from the ignition cylinder.
Remote Illuminated Entry
Interior lights will illuminate for 40 seconds when the unlock button is pressed on the remote control door lock transmitter or when the liftgate release
button is pressed on the remote control door lock transmitter. Interior lights will illuminate for 2 seconds when the lock button is pressed on the remote
control door lock transmitter.
Power Door Lock/Unlock Function
The BCM is responsible for energizing the door lock relay. The door lock relay will be energized whenever the BCM receives a command from any of
the door lock/unlock switch or a input from the remote control door lock transmitter.
Door Lock/Unlock Switch Function
The drivers door lock switch and the passenger door lock/unlock switches are inputs to the BCM. The BCM will command the door lock relay to unlock
the drivers door according to the state of the drivers door lock switch or the passenger door lock switch.
Liftgate Release Function
The liftgate release switch is an input to the BCM. The BCM will command the liftgate to release if the vehicle is in park/neutral or if the park brake
conditions are met or if the liftgate release switch is pressed. When the BCM receives a message to activate the liftgate release solenoid from the remote
control door lock transmitter, the BCM energizes the liftgate release relay if the vehicle is in park/neutral or if the park brake conditions are met.
Lockout Prevention
The lockout prevention feature is activated when the key is in the ignition switch, any door is opened and then the power lock switch is pressed. This
feature will lock the doors then unlock the driver door.
Remote Lock
Press the remote control door lock transmitter lock button once and all doors will lock. Press the remote control door lock transmitter lock button twice
within 3 seconds and all doors will lock and the horn will chirp.
Remote Unlock
Press the remote control door lock transmitter unlock button once and the driver door will unlock, the park lamps will flash and the interior lights will
turn on. Press the remote control door lock transmitter unlock button twice within 3 seconds and all remaining doors will unlock, the park lamps will
flash and the interior lights will turn on. Press the rear button twice within 3 seconds and the liftgate will unlock, the park lamps will flash and the
interior lights will turn on.
Audible Warnings
When the BCM determines a driver warning sound is needed, the BCM will sound the chime when applicable.
Key In Reminder
The chime will sound when the ignition switch is not in the run or crank position and the ignition key is in the ignition key cylinder and the drivers door
is opened.
Head Lamp Reminder
The chime will sound when the headlamp switch is in the parklamp or headlamp position and the dome lamp switch (thumbwheel) is not at the full down
(max dim) position and the ignition switch is in the off position or ACC position. If the dome lamp switch is in the full down position (max dim) and the
headlamps are turned on manually and the ignition key is removed the headlamp reminder chime will not sound.
Seat Belt Reminder
The chime will sound for 6 seconds when the ignition switch is turned from the off position to the run position and the seat belt is unfastened. The seat
belt telltale on the IPC will also turn ON.
Turn Signal Reminder
The chime will sound when the right or left turn signal is turned on for more than 0.75 miles. The chime will be synchronous with the turn signal flasher.
Driver Warning Telltales
The BCM activates the seat belt telltale on or off in the Instrument Panel Cluster (IPC).
Interior Lighting Control
The BCM can turn on some of the interior lighting independently of the interior lighting system. The vehicles lighting system also can control the same
lighting components. The BCM provides the following interior lamp control:
^
Courtesy lamps.
