gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Front Seat|Page 10371 > < Front Seat Belt - Retractor and Buckle Replacement
Page 1
background image

Seat Belt: Service and Repair
Front Seat

Regular Cab With Bucket Seat

Caution:  Replace belts, retractors, and hardware in use in all but a minor collision. Also, Restraint systems should be replaced and anchorages
properly repaired if they were in areas damaged by a collision, whether the belt was in use or not. If there is any question, replace the belt
system. Damage, whether visible or not, could result in serious personal injury in the event of an accident.

Caution:  Refer to Belt Replacement Caution in Cautions and Notices.

Notice:  Refer to Servicing and Replacing Seat Belt Notice in Cautions and Notices.

1. Remove the cover from the door pillar anchor plate. Pry up the bottom.
2. Remove the bolt from the door pillar weld nut.

3. Remove the bolt retaining the retractor to the floor panel.
4. Remove the retractor from the vehicle.
5. Remove the cover from the buckle assembly which conceals the nut.

Front Seat|Page 10371 > < Front Seat Belt - Retractor and Buckle Replacement