K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Blower Motor Switch: Service and Repair
HVAC System - Manual
REMOVAL PROCEDURE
1. Remove the instrument cluster trim.
2. Remove the control assembly by completing the following steps:
2.1. Use a small screwdriver in order to release the retainers.
2.2. Pull the control assembly from the instrument panel.
3. Disconnect the electrical connectors, as necessary.
INSTALLATION PROCEDURE
1. Connect the electrical connectors as necessary.
2. Snap the control assembly to the instrument panel.
3. Install the instrument cluster trim.
4. Test the circuit operation.