K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
4. Install the steering gear to the frame of the vehicle.
5. Install the relay rod (10) to the Pitman arm ball stud.
6. Make sure the seal is on the stud.
-
Tighten the J 29193 or the J 29194 to 62 Nm (48 ft. lbs.) in order to seat the tapers.
7. Remove the J 29193 or the J 29194.
8. Install the new prevailing torque nut.
-
Tighten the new prevailing torque nut to 62 Nm (46 ft. lbs.).
9. Lower the vehicle.
