K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
2. Position the J 33737 over the bore with the hex nut facing the parking pawl linkage.
Notice: Refer to Fastener Notice in Service Precautions.
3. Fasten the J 38737 with the two rear servo cover bolts.
^
Tighten the bolts to 24 Nm (18 ft. lbs.).
4. Ensure the J21370-10 moves freely in the tool and the pin bore.
5. In order to determine the correct pin length, tighten the nut on the gauge.
^
Tighten the nut to 34 Nm (25 ft. lbs.).
6. Select the correct band apply pin length.
