gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

M/T - Comes Out Of Gear|Page 6765 > < M/T - Comes Out Of Gear|Page 6759
Page 1
background image

Technical Service Bulletin # 01-07-29-001

Date: 010201

M/T - Comes Out Of Gear

File In Section: 07 - Transmission, Transaxle 

Bulletin No.: 01-07-29-001

Date: February, 2001

TECHNICAL

Subject:
Manual Transmission Comes Out of Gear 
(Install New Shift Shaft Lever)

Models:
1999-2000 Chevrolet and GMC C/K, S/T Pickup Models
with NV3500 5SP Manual Transmission (RPOs MG5, M50)

Condition

Some owners may comment on the transmission coming out of gear. Typically 1st gear is most affected.

Cause

This condition may be due to a design change of the shift shaft lever that eliminated the detent plunger hole, spring and plunger.

Correction

Install the new shift lever that has been updated with the detent plunger hole.

Parts Information

Parts are currently available from GMSPO

Warranty Information

For vehicles repaired under warranty, use table shown.

DISCLAIMER

Removal Procedure

Removal Procedure Tools Required

^

J 23907 Slide Hammer with Bearing Adapter

M/T - Comes Out Of Gear|Page 6765 > < M/T - Comes Out Of Gear|Page 6759