K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Four Wheel Drive Selector Switch: Service and Repair
Transfer Case - NVG 246-NP8 (Two Speed Automatic)
Removal Procedure
1. Remove the automatic transfer case switch from the instrument panel.
^
Pull the tabs on the rear of the switch in.
^
Pull the switch straight out from the panel.
2. Remove the electrical connector from the automatic transfer case switch.
Installation Procedure
1. Install the electrical connector to the automatic transfer case switch.
2. Install the automatic transfer case switch into the instrument panel.
3. Ensure the automatic transfer case switch locks into the instrument panel.
