K 1500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Transfer Case Actuator: Service and Repair
Transfer Case - NVG 246-NP8 (Two Speed Automatic)
Removal Procedure
1. Remove the transfer case shields.
2. Remove the transfer case wiring harness connectors from the motor/encoder.
3. Remove three bolts securing the motor/encoder gasket and motor/encoder to the transfer case.
4. Retain the rubber gasket for reuse.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
