K 1500 Yukon 4WD V8-4.8L VIN V (2003)
7. Remove the engine shield bolts.
8. Remove the engine shield.
Important: DO NOT raise and/or support the engine by the crankshaft balancer, or oil pan.
9. Raise and suitably support the engine using adjustable (screw type) jack stands.
10. Remove the engine mount bolts.
11. For vehicles with 4WD, remove the front propeller shaft.
12. Remove the left engine mount.
Installation Procedure
1. Position the left engine mount to the engine.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
