K 1500 Yukon 4WD V8-4.8L VIN V (2003)
Tie Rod End: Service and Repair
Outer
REAR WHEEL STEERING TIE ROD END REPLACEMENT (OUTER)
TOOLS REQUIRED
J 24319-B Universal Steering Linkage Puller
REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Vehicle Lifting.
NOTE: Refer to Rear Wheel Steering Lifting and Jacking Notice in Service Precautions.
2. Remove the tire and wheel.
3. Remove the tie rod bracket (2) retaining bolts (1) from the steering knuckle.
4. Loosen the tie rod jam nut (1).
5. Remove the nut retaining the outer tie rod end to the steering knuckle.
