K 1500 Yukon 4WD V8-4.8L VIN V (2003)
1. Install the inner pinion bearing cup into the pinion gear bearing retainer using the J37624 (2) and the J8092 (1).
2. Install the outer pinion bearing cup into the pinion gear bearing retainer using the J8608 (2) and the J8092 (1).
3. Install the inner pinion bearing using the J24433.
Press the bearing on until the cone seats on the pinion.
4. Install a new collapsible spacer.
5. Lubricate the pinion bearings with axle lubricant. Use the proper fluid.
