K 1500 Yukon 4WD V8-5.3L VIN T (2000)
Important: If installing the original access door without a door side service hinge or a used access door, you must modify the door side of
the hinge (1) lower extensions (2).
Hinge extensions must maintain a wall thickness of 2 mm between the end of the extensions and the body side hinge nuts (3).
Maintain a wall thickness of 2 mm around the hole at the end of the extension (4).
Prior to refinishing, refer to publication GM 4901M-D-2000 GM Approved Refinish Materials for recommended products. Do not
combine paint systems. Refer to paint manufacturer's recommendations.
16. Clean and prepare all surfaces.
17. Refinish as necessary.
18. Install and align all related panels and components.
