K 1500 Yukon 4WD V8-5.3L VIN T (2000)
2. Using the J 38778, remove the weatherstrip from the mounting surface.
Installation Procedure
Important: Apply the weatherstrip in an environment that is free from dust or dirt that could come into contact with the adhesive backing.
Foreign material may cause improper adhesion.
1. Install the weatherstrip to the mounting surface by completing the following steps:
1. Peel off the backing paper.
2. Press the retainers into place.
2. Close the door.
Rear Door Weatherstrip Replacement
Rear Door Weatherstrip Replacement
Removal Procedure
1. Open the rear door.
2. Remove the rear door weatherstrip by pulling the weatherstrip from the track.
3. Release push-in retainers on lower weatherstrip from door.
4. Remove the rear door weatherstrip from the rear door.