K 1500 Yukon 4WD V8-5.3L VIN T (2000)
Drink Holders: Removal and Replacement
Front Floor Console Cup Holder Replacement
Front Floor Console Cup Holder Replacement
Removal Procedure
1. Open the cup holder by pulling down from the rear of the floor console.
2. Remove the tabs (1) that connect the cupholder to the floor console by gently prying apart with a flat bladed tool.
3. Remove the cup holder from the vehicle.
Installation Procedure
1. Install the cup holder to the vehicle.
2. Install the cup holder to the floor console by snapping tabs (1) to console back in place.
