K 1500 Yukon 4WD V8-5.3L VIN T (2000)
1. Open the door.
2. Remove the extension by pulling outward from the top of the trim.
INSTALLATION PROCEDURE
Install the extension by inserting the lower portion and pushing the retain clips into position.
Windshield Pillar Garnish Molding Replacement
Windshield Pillar Garnish Molding Replacement
Removal Procedure
1. Pull the molding straight out in order to release the retainers.
2. Disconnect the electrical connector.
3. Remove the windshield garnish molding.
Installation Procedure