K 1500 Yukon 4WD V8-5.3L VIN T (2000)
5. Install the cable to the mounting bracket until the locking tabs snap into place.
6. Connect cable end to the equalizer.
7. Tighten the nut to the intermediate cable at the equalizer.
^
Tighten the nut to 3.5 N.m (31 lb in).
8. Remove the safety stands.
9. Lower the vehicle.
10. Adjust the park brake cable. Refer to Park Brake Lever Adjustment.
Right Rear
Removal Procedure
1. Release the parking brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Relieve the tension on the park brake cables by loosening the nut at the equalizer.
