K 1500 Yukon 4WD V8-5.3L VIN T (2000)
6. Disengage the oil cooler line retaining clip at the fan shroud.
7. Remove the oil cooler line from the radiator).
8. Raise and support the vehicle. Refer to Vehicle Lifting.
9. Remove the under body protective shields.
10. Remove the oil cooler line junction block bolts.
11. Remove the oil cooler line clip bolt.
12. Remove the oil cooler lines.
13. Discard the gasket.
14. Inspect all of the fittings, the connectors and the cooler lines for damage or distortion.
Installation Procedure
1. Install the oil cooler lines using a new gasket.
