K 1500 Yukon 4WD V8-5.3L VIN T (2000)
13. Install the transmission oil cooler pipe retainer and the bolt to the oil pan.
14. Install the engine oil cooler pipe to oil pan bolt.
Tighten the engine oil cooler pipe nut to 10 N.m (89 lb in).
15. Install the engine wiring harness retainer bolts to the engine oil pan.
16. Connect the oil level sensor electrical connector.
17. Install the transmission to oil pan bolts.
Tighten the bolts to 55 N.m (41 lb ft).
18. Install the front differential if equipped with four wheel drive. Refer to Differential Carrier Assembly Replacement in Front Axle.
