K 1500 Yukon 4WD V8-5.3L VIN T (2000)
4. Connect the coolant hose to the vapor vent pipe.
5. Connect the accelerator control cable and the cruise control cable to the throttle body.
6. Connect the TP sensor and the IAC valve electrical connectors.
7. Connect the vacuum hose to the throttle body.
8. Install the air intake duct.
9. With the engine OFF, verify that the accelerator pedal moves freely. Depress the accelerator pedal to the floor and release the pedal.
10. Perform the Idle Learn Procedure. Refer to Idle Learn Procedure.