K 1500 Yukon 4WD V8-5.3L VIN T (2000)
9. Pull up on the center tabs of the lock button (2).
10. Remove the E-clip by pulling radially on the center section of the E-clip.
Important: Do not reuse the existing removed E-clip.
Discard the removed E-clip.
11. Pull the shift cable center connector ends apart.
12. Remove the cable half from the vehicle.
13. Obtain a new E-clip for installation.
14. Install the E-clip to the shift cable end by pushing the E-clip straight down (radially) onto the cable end.
