K 1500 Yukon 4WD V8-5.3L VIN T (2000)
5. Remove the retainer clip (379), torque converter clutch solenoid (396), and the O-ring.
6. Remove the wiring harness bolts and let the wiring harness hang.
7. Remove the manual shift detent spring bolt.
8. Remove the manual shift detent spring assembly.
9. Remove the remaining control valve body bolts.
10. Remove the manual valve link and the control valve body from the transmission case.
11. Remove the accumulator, spacer plate, and gaskets. Refer to Accumulator Assembly, Spacer Plate, and Gaskets.
Disassembly Procedure