K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
1. Connect the electrical connector.
2. Install the speaker.
Push the speaker into place. Ensure that the speaker is completely seated.
3. Install the trim panel.
4. Inspect the component operation.
Speaker Replacement - Front Side Door Upper
REMOVAL PROCEDURE
1. Remove the front door trim panel (1).
2. Remove the speaker grill.
3. Remove the fasteners (2).
4. Remove the speaker from the door trim panel (1).
INSTALLATION PROCEDURE
1. Position the speaker into the opening in the door trim panel (1).
2. Install the fasteners (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten to 1.6 N.m (14 lb in).
3. Install the speaker grill.
4. Install the front door trim panel.
Speaker Replacement - Rear Pillar