K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
4. Using a flat-bladed tool, separate the bond between the sealer and the door.
5. Pull the waterproof sealing tape from the deflector.
6. Remove the water deflector.
Installation Procedure
1. Position the electrical connectors through the water deflector.
2. Using waterproof tape, or 3M(R) 777, or equivalent, install the water deflector to the door.
3. Install the trim panel to the door.
Water Deflector Replacement - Rear Side Door
WATER DEFLECTOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the rear door trim panel.
2. Using a flat-bladed tool, break the bond between the sealer and the door.
3. Pull off the water deflector from the inner door panel.
INSTALLATION PROCEDURE