K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
Lower Side Moulding / Trim: Service and Repair
Molding Replacement - Rear Body Side - Lower Rear (Z-71)
Molding Replacement - Rear Body Side - Lower Rear (Z-71)
Removal Procedure
1. Remove the 3 push-pins from the lower rear body molding.
2. Remove the molding from the vehicle.
Installation Procedure
1. Install the molding to the vehicle.
2. Install the 3 push-pins to the lower rear body molding.
