gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Interior - Floor Console Cupholder Rattles|Page 22456 > < Disabling and Enabling|Page 22447
Page 1
background image

Drink Holders: Customer Interest
Interior - Floor Console Cupholder Rattles

File In Section: 08 - Body and Accessories 

Bulletin No.: 03-08-49-001

Date: January, 2003

TECHNICAL

Subject:
Rattle in Floor Console Cupholder Door 
(Add Felt Washer)

Models:
2003 Cadillac Escalade, Escalade EXT
2003 GMC Sierra Denali, Yukon Denali, Yukon XL Denali
with Luxury Package (RPO Y91) and Custom Front Floor
Compartment (RPO D07)

Condition

Some customers may comment on a rattle or squeak noise coming from the front floor console area.

Cause

The lower bezel of the front floor console cupholder door may have too much lateral movement, causing an intermittent rattle noise.

Correction

Add a new 1 mm (0.04 in) felt washer to the passenger side pivot point of the cupholder door (1). There will be two felt washers after the addition of this
washer. This should aid in reducing the rattle noise.

Use the following procedure and the part number below.

1.

Remove the IP cluster bezel. Refer to the Bezel Replacement - Instrument Panel (I/P) Cluster Replacement procedure in the Instrument Panel,
Gauges and Console sub-section of the Service Information (SI).

2.

Remove the floor console upper bezel. Detach the harness connector. Refer to the Bezel Replacement - Floor Console Luxury Upper Replacement
procedure in the Instrument Panel, Gauges and Console sub-section of the Service Information (SI).

3.

Remove the floor console lower bezel. Detach the harness connector.

Interior - Floor Console Cupholder Rattles|Page 22456 > < Disabling and Enabling|Page 22447