K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
13. Remove and discard the old gasket (1).
14. Remove the oil fill tube from the rocker cover, if required.
15. If required, clean and inspect the rocker arm cover.
Installation Procedure
Important: All gasket surfaces should be free of oil or other foreign material during assembly.
DO NOT reuse the valve rocker arm cover gasket.
1. Lubricate the O-ring seal of the NEW oil fill tube with clean engine oil.
2. Insert the NEW oil fill tube into the rocker arm cover. Rotate the tube clockwise until locked in the proper position.
